Zero Leakage Housing
- The specially designed integrated injection molding shell is not only light and beautiful, but also can ensure zero wind leakage in the high pressure warehouse.
- The zero leakage shell also reduces the noise of the dryer, and the noise of the whole machine is controlled to less than 80 decibels during working, which greatly improves the working environment of the groomer.
Controllable Heating & Wind Speed
- The wind speed adjustment and temperature adjustment of the CVT can realize the combination of high temperature and low speed, low temperature and high speed, etc. In particular, the high temperature and low speed are very important for the styling pretreatment of curly coated dogs such as Poodle and Bichon, which are essential functions for straightening hair and preparing for the trimming.
- The fan adopts the "soft start" mode to avoid the impact and prolong the service life;
- There is also a built-in overheating protection switch on the heater element -- providing the above broad functionality while also ensuring safety.
Special Designed Nozzles
- Based on Bernoulli effect, combined with the latest fluid mechanics technology, innovative research and development of ultra-low temperature nozzle.
- Most similar products on the market are at risk of overheating for nozzle -- high temperatures and high speeds of wind quickly heat the nozzle surface to more than 50-60 degrees Celsius, making it impossible for pet groomers to hold them safely.
- The new ultra-low temperature nozzle has a special double-layer suction structure: when the wind speed in the inner duct is higher and the air volume is greater, the outer duct can accelerate the suction, the cooling effect is proportional to the inner wind flow, so as to ensure that the surface of the nozzle is cooled by air without significant temperature rise.
- Example of measured data: When the ambient temperature is 20℃, after about 5 minutes of continuous blowing, the internal temperature of the blowing nozzle rises to 65℃, while the surface temperature of the blowing nozzle is always within 30℃, which ensures a safe and comfortable holding experience.
Standard Two Nozzles
- Easy to intall, securely stay on the hose
- Narrow Nozzle - The outlet of the flat tip is shaped like a crescent, which concentrates the wind from both sides to the middle, avoiding unnecessary air waste, and is very suitable for quick blow-dry of long and slender parts such as legs and tail.
- Rouble Nozzle - Special tilt treatment is made at the outlet of the round nozzles, which not only meets the requirements of normal blowing, but also it can drying of the abdomen and other parts that are not easy to be directly touched, so as to accelerate the drying speed.
Excellent Insulating Hose & Sleeve
- After lot of experiments and the results showed when the hose surface shows temperature at over 64℃s, the nozzle only measures 29.8℃. The heat insulation sheath works very well too, when inside is 65℃, the outside is only at 38℃, providing safe operation on groomers' arms.
Easy To Clean
- The rear cover is easy to remove, the built-in double filter sponge, not only can reduce the air inlet noise, but also can fully filter the impurities and dust inhaled, prolong the life of the machine.
Be The First To Review This Product!
Help other OZ Grooming World users shop smarter by writing reviews for products you have purchased.